Captan'H
Active ingredients:  %50 captan
Formulation: WP (water soluble powder)
Properties:  Protective and medicative fungicide. It is used against such disease as Alternaria, Botrytis, Pythium, Rhizoctonia, Venturia, and many others.
Packing:  800 gr, 400 gr, 3 gr.
 
Plants and Diseases to Use for
Plant name
Diseases name
Usage doze
The time between last disinfectant apply and harvesting
Pear
Pear scab (Venturia pyrina)
150 gr/100 lt of water
3 days 
Apple
Apple scab (Venturia inaequalis)
150 gr/100 lt of water
3 days
Plum
Plum tarphina
(Taphrina pruni)
300 gr/100 lt of water
3 days 
Peach 
Monilia
(Sclerotinia laxa)
300 gr/100 lt of water
3 days 
 
Leaves perforation
(Coryneum beijerinckii)
300 gr/100 lt of water
3 days 
Apricot
Monilia (Sclerotinia laxa)
300 gr/100 lt of water
3 days
 
Leaves perforation
(Coryneum beijerinckii)
300 gr/100 lt of water
3 days 
Japanese medlar
Black spots
(Venturia inaequalis var eribotryae)
300 gr/100 lt of water
3 days
Sweet cherries
Monilia (Sclerotinia laxa)
300 gr/100 lt of water
3 days
Cherry
Monilia (Sclerotinia laxa)
300 gr/100 lt of water
3 days
Citrus
Brown rot (Phytopthora citrophthora)
300 gr/100 lt of water Fruit infections
7 days
Vegetables
Sprig roots rot
(Phytophthora spp., Rhizoctonia solani, Pythium sp. Alternaria sp. Fusarium sp.)
200-250 gr/100 lt of water
7 days
 
Grey mould
(Botrytis cinerea)
250 gr/100 lt of water
7 days
Tomato
Mildew 
(Phythophthora infestans)
300 gr/100 lt of water
7 days
 
Leaves fungus
(Cladosporium fulvum)
250 gr/100 lt of water
7 days
Lettuce
Mildew
(Bremia lactucae)
300 gr/100 lt of water
7 days
Onion
Mildew 
(Peronospora destructor)
300 gr/100 lt of water
7 days
Potato
Mildew (Phythophthora infestans)
350 gr/100 lt of water
7 days
Cloves
Rust
(Uromyces dianthi)
250 gr/100 lt of water
Garden
Mildew 
(Plasmopara viticola)
300 gr/100 lt of water
3 days
 
Dead arms
(Phomopsis viticola)
250 gr/100 lt of water (summer application) 
3 days
 
 
* It is used during summer application. 
** Cannot be used on the territory for consumable garden leaves seeding.
*** Two dozes of seedbed spraying changes in accordance with severity and plant vegetation period.
 
PREPARATION OF PLANT SAFETY PRODUCT FOR APPLY: Taking into account the advised doze first mix the plant safety product with some water in separate vessel. The container of spraying machine should be half-full by water. The mixture should be added into container while the mixer of machine is working. While continuing the mixing, fill the container with water. The mixing action should be continued till the end of spraying. The prepared plant safety product should be used the same day. 
 
CALIBRATION: The calibration of the spraying machine should be done before spraying. The doze of mixture should be calibrated for covering all the spraying area. The spraying should be done in cool period of the day in breathless or light wind weather. 
 
CLEANLINESS OF SPRAYING MASHINE: Straight after the end of spraying carefully drain the container of machine. Fill the container with clean water, and run the mixer and sprayer to let it clean all the parts of the machine. Do not wash the machine near water sources. Do not pour the spoiled water and wastes into water sources.
 
 
THE USAGE OF PLANT SAFETY PTODUCT:
 
Pear scab:
If there is no bough struma
1st spraying: the swelling of the flower buds
2nd spraying: in the period of white rosebud bourgeon
3rd spraying: when 70-80% of petal fall off
4th and other sprayings should be applied within 8-10 days in accordance with weather conditions and severity.
 
Apple scab:
If there is no bough struma
1st spraying: the swelling of the flower buds
2nd spraying: in the period of pink rosebud bourgeon (when the flowers are seen separately)
3rd spraying: when 70-80% of petal fall off
4th and other sprayings should be applied within 10 days when the weather conditions are favourable for disease development.
 
Plum tarphina:
1st spraying: in the period of the swelling of the buds
2nd spraying: when 80% of petal fall off
 
Flower monilia in hard stonefruit (Peach, Sweet cherries, Cherry):
1st spraying: in the beginning of blossom (5-10% of flowers)
2nd spraying: in the period of full blossom (90-100% of flowers)
 
Peach leaves perforation:
1st spraying: in the autumn straight after the leaf fall
2nd spraying: in the spring before the buds are opened (in the period of pink flower buds)
 
Apricot leaves perforation:
1st spraying: in the autumn straight after the leaf fall
2nd spraying: in the spring before the buds are opened (in the period of pink flower buds)
3rd spraying: should be done in fruits when the sepal and male organ surface slip off to the fruit end
 
Brown rot and trunk histoma in citruses:
*Against fruit infections:
1st spraying: should be conducted in autumn before rains start
2nd spraying: should be applied 15 days after the 1st one if the weather is rainy
 
*Against trunk infections:
The injuries on the infected trees should be cleaned till the tree surface in October, January, and March.
 
Japanese medlar black spots:
1st spraying: in autumn before the swelling of the buds
2nd spraying: before opening of the flower buds
3rd spraying: after petal fall off
4th and the other sprayings: should be applied within 10 days of each other between the 3rd spraying and 20 day before harvest
 
Garden dead arm:
 
*Summer application:
 
1st spraying: when the sprigs are 2-3 cm high
2nd spraying: when the sprigs are 8-10 cm high
3rd spraying: when the sprigs are 25-30 cm high
 
Garden mildew:
 
The 1st spraying should be started when the springs are 25-30 cm high. The 2nd and the further sprayings should be applied within 10-15 days of each other in accordance with the 1st spraying, disease development level and meteorological factors. 
 
Roots rot and collapse of vegetable seedbeds: the spraying is started when the symptoms of disease are seen in seedbeds and should be applied 2-3 times within a week of each other till the disease development stops. 
 
Tomato mildew: The spraying should be started when there is a spew in the form of white ash under the 3-5 cm sized brown spots on leaves of the tomato plants or when there are observed the favorable conditions for disease in the places where it usually occurs. In accordance with severity and climate conditions the spraying is continued within 10-12 days.
 
Tomato leaf mold: The spraying is started when the first spots are seen on leaves. Sprayings are repeated within 10-15 days of each other. The last spraying should be stopped 15-20 days before the harvest.
 
Lettuce mildew: Protective spraying should be applied before the disease symptoms are seen in seedbeds. In case of mildew appearance the ill parts of the plant should be gathered and eliminated. After that the spraying should be continued within a week of each other till distract of seedbeds to the field. In the field period the spaying should be started when the disease symptoms are seen around, the spraying should be continued till one week before harvest within one week of each other.
 
Onion mildew: The spraying should be started when the average day temperature reaches 16°C and the relative humidity is 80%, but the spraying can be started when the first symptoms of disease are seen around.
 
Potato mildew: The spraying should be started in the wet weather conditions favourable for disease development or when the first symptoms of the disease are seen around. The spraying should be applied within 10 days of each other in accordance with severity.
 
Cloves rust: The sprigs should be started to be sprayed before being queued and the sprayings should be continued within 10 days of each other.
 
Grey mould in vegetables (Tomato): The spraying should be started when the first symptoms of disease are seen around and in the period of flower blossom of the plants. The sprayings should be applied within 10 days of each other.    
 
RESISTANCE INFORMATION: Captan’H plant safety product is a fungicide classified to Group M4 in accordance with its  impact mechanism. The repetitive sprayings by the plant safety products with the same impact mechanism stimulate the resistance development. Because of this for delay of the resistance development do not exceed the advised general number of sprayings by Captan’H in a season. If the repetition of spraying is needed, concentrate on usage of plant safety products having a different impact mechanism (except M4 Group).
MIXING POSIBILITIES: It should not be mixed with alkaline character and oiled protective preparations. Before mixing with the other plant protection products the test mixture should be prepared.
 
First read the label.
  • Do not use at home
  • Keep away from children, food and animal feed
  • Do not eat, drink and smoke while applying Plant safety product
  • Do not let people and animals enter the injected area during 1 day
  • To prevent the risks to people and environment use the product in accordance with instructions and indicated dozes.
 
IT IS STRICTLY PROHIBITED TO USE ON NON-ADVICED PRODUCTS.
 
SYMPTOMS OF POISONING: Can cause irritation on skin, eyes, nose and throat.
 
FIRST AID MEASURES:
Eyes: In case of contact wash the open eyes with water during 15–20 minutes. If needed consult a physician.
Skin: In case of contact take off the polluted clothes. Wash the polluted parts of body with water during 15-20 minutes. In case of spread and sensitivity consult a physician.
Swallowing:  In case of swallowing cause vomiting. Immediately consult a physician. Show the product package to the doctor. Do not induce vomiting and do not give anything to swallow to the unconscious person.
Respiration: The poisoned person should be transferred on the open air. In case of hard breathing give oxygen, if do not breath give artificial respiration. Consult a physician.
 
ANTIDOTE  AND TREATMENT:
There is no special antidote. The medical treatment is assigned in accordance with symptoms.
 
 
ZƏRƏRLİLİK İFADƏLƏRİ (H):
H317 It causes the allergy reactions.
H318 It causes serious harm to eyes.
H332 It is toxic in case of inspiration.
H351 It is suspected that it causes cancer.
H400 It is very toxic in aquatic environment.
 
 
MEASURES STATEMENT (P):
P273 Do not pour to the environment.
P280 Use protective gloves/protective clothes/eye glasses/fae mask.
P333+P313 In case of skin irritation get medical aid.
P308+P313 In case of affection get medical aid.
P261 Do not inhale the powder and smoke.
P501 Eliminate the packing in accordance with instructions.
EUH401 To prevent the risks to the people health and environment obey the usage instruction.
 
 
 
POINTS TO CONSIDER WHILE USING AND STORAGE:
  • It is poisonous for bees. Do not use during flowering.
  • It is poisonous for fish. Do not mix into water sources.
 
STORAGE CONDITIONS: The physical, chemical and biological resistance does not change during 4 years if stored in normal conditions (cool and dry) in their original package.
 
COMPANY STATEMENT:
Manufacturers can guarantee the quality of plant safety products if sold in their original package. Manufacturers do not take responsibility for damage and harm caused by incorrect storage or apply by users or by non-observance of usage advices.
 
THE LICENSE HOLDER AND MANUFACTURER:
HEKTAŞ TİCARET T.A.Ş.
 

 

Search

Best-Selling Products

New products

Weather

Certificates